How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask supertech Your Own Question
supertech, master tech
Category: Jeep
Satisfied Customers: 2251
Experience:  a1-a8,l1,t2,b5.ASE triple chrysler master tech 42yr experience HEV chrysler Specialist
Type Your Jeep Question Here...
supertech is online now
A new question is answered every 9 seconds

05 jeep wrangler giving p0152 code after changing all four

Resolved Question:

05 jeep wrangler giving p0152 code after changing all four 02 sensors. I know what the code means how do I fix it.
Submitted: 6 years ago.
Category: Jeep
Expert:  supertech replied 6 years ago.
Hi my name is John

Have you done these tests?

Let me know what else you need and what you find out.
Customer: replied 6 years ago.

Thanks I will run these check and let you know should be some time on Friday


Expert:  supertech replied 6 years ago.
Your welcome,let me know when you can.
Customer: replied 6 years ago.

John a quick adder the check engine light goes off sometimes for a littl while and there is no code and then it comes back. does that change any thing. Sorry for the late info this is my wifes car, you don't always get all the info at the same time.


Expert:  supertech replied 6 years ago.
You want to do the test when the check engine light is on.
Expert:  supertech replied 6 years ago.
If i have help you,please push the accept button when were done.

Thank you for choosing just answer
supertech and 5 other Jeep Specialists are ready to help you
Customer: replied 6 years ago.

Hi I have checked to voltage. I have three different reading on three different wires. Whitch one is the singal wire. I did have a reading above 5v and reading on the other wires of 2.7 and 3.5v Is this a bad sign?



Expert:  supertech replied 6 years ago.

Pin 1 is 12 volts when the heater for the oxygen sensor is on when the engine is first started. Brown / violet wire

Pin 2 is the ground, black/light green

Pin 3 is the return signal the voltage will go up and down here. brown/dark green wire.

Pin 4 should have 12 volts also.
Customer: replied 6 years ago.

Sorry it has taken so long to get back to you, have a lot of other things to deal with.

So what does it mean that I do not have 12v on any of these pins when the engine is running?

Expert:  supertech replied 6 years ago.
There is either a open in the circuit or shorted wire.

Related Jeep Questions