How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask b5demon Your Own Question
b5demon, Technician
Category: Jeep
Satisfied Customers: 3716
Experience:  ASE and Chryler/Jeep master technician for 17 years
Type Your Jeep Question Here...
b5demon is online now
A new question is answered every 9 seconds

Where is the Crankshaft Sensor on a 1994 Jeep Grand Cherokee

Resolved Question:

Where is the Crankshaft Sensor on a 1994 Jeep Grand Cherokee Laredo -XXXXX 8 cylinder, 5.2 engine. And how do I get to it.
The Jeep starts but dies after only a couple of seconds, we have checked the fuel persure, and it was okay, and we have chenged the Fuel Pump Relay, and The Automatic Shut Off Modules
Submitted: 6 years ago.
Category: Jeep
Expert:  b5demon replied 6 years ago.
the crank sensor is located in the transmission bell housing behind the right cylinder head you can access it from the engine compartment be reaching behind the right cylinder head but it is tight and not a lot of room
b5demon and 3 other Jeep Specialists are ready to help you

Related Jeep Questions