How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris Your Own Question
Chris
Chris, Shop Foreman
Category: Jeep
Satisfied Customers: 3203
Experience:  Jeep Certified Master Tech
12365498
Type Your Jeep Question Here...
Chris is online now
A new question is answered every 9 seconds

2006 Jeep Liberty: I have been told the EGR system is not working

Customer Question

i have a 2006 Jeep Liberty Diesel.The engine light is constantly on. When I have taken it in I have been told the EGR system is not working. They repair the problem the light goes off and comes back on in a week. I no longer have a warranty and I do not believe the diagnosis. What can be done to get this engine light off and keep an eye on this RGR issue?
Submitted: 7 years ago.
Category: Jeep
Expert:  brownjeff replied 7 years ago.
What code are you getting from the computer?
Customer: replied 7 years ago.
Does AJR 2815 mean any thing. I took this off the paperwork on the repairs. I have them all and this code is repeated on each job concerning EGR.
Thomahawk 1947
Expert:  brownjeff replied 7 years ago.

Sorry the number doesn't mean anything?

 

Can you send me the vin# XXXXX I can check for bulletins

Customer: replied 7 years ago.
The Vin # XXXXX XXXXX
Thomahawk
Expert:  brownjeff replied 7 years ago.
Sorry didn't see anything and will be off the computer until Monday.....Let me see if another expert can help so you don't have to wait.
Customer: replied 7 years ago.
I can wait until Tuesday as I will be out of Town
Thomahawk.
Customer: replied 7 years ago.
Today is Wed. Nov4/09 I will be here today and then gone for at least a week. Please bring me up to date
Thomahawk 1947
Expert:  brownjeff replied 7 years ago.
Have been trying to find information on the code you gave me but can't find any....Do you by chance have any additional information?
Customer: replied 7 years ago.
I went through all of my paper work. I found the following. P0401Low EGRFlow control. Replaced failed EGR Control Valve.Another code stated wasP010. Paper work also talks about cleaning the cooler and sensor. I wold be happy to send copies of all this if it would help..
Thomahawl 1947
Expert:  brownjeff replied 7 years ago.
I found the code P0401 are you sure about the number P010?
Customer: replied 7 years ago.
I am sure it was included with the other code PO401 which references failure of EGR'
Thomahawk 1947
Expert:  brownjeff replied 7 years ago.

Has the mass aif flow sensor been checked/cleaned?

 

Has the egr air flow control valve been replaced?

Customer: replied 7 years ago.
Brownjeff
The answer is yes and yes.
Thomnkawk
Expert:  brownjeff replied 7 years ago.
WOW I am at a loss....let me send the information to the other experts and see if they can help.
Customer: replied 7 years ago.
Brownjeff
Than you but keep in mind I just want to turn off the dam light. Every thing that reflects that EGR has been relplaced or cleaned.
Thomahawk