How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dave Your Own Question
Dave, Jeep Master Tech
Category: Jeep
Satisfied Customers: 1158
Experience:  Chrysler Triple Master, ASE master Tech AA degree in Auto.
Type Your Jeep Question Here...
Dave is online now
A new question is answered every 9 seconds

2006 Jeep Liberty: the 2WD position and the light goes..4WD.

Resolved Question:

I have a 2006 Jeep Liberty and the Part Time light is stuck on in the 2WD position and the light goes out when it is put into 4WD. What would cause this and can I fix it easily?
Submitted: 7 years ago.
Category: Jeep
Expert:  Dave replied 7 years ago.

HI, sounds like the 4x4 switch on top of the transfer case is going bad.


It is easy to do, it is located on top of the transfer case and has a connector on top of it. Just disconnect the connector and unscrews the switch and screw the new one inb and hook it up.


The part is called the 4x4 position switch.



Dave and other Jeep Specialists are ready to help you

Related Jeep Questions