How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask dually2 Your Own Question
dually2, ASE Certified Technician
Category: Jeep
Satisfied Customers: 651
Experience:  ASE master certified,worked for the Dodge,Chrysler,Jeep line for 25 yrs
Type Your Jeep Question Here...
dually2 is online now
A new question is answered every 9 seconds

96 Grand Cherokee: coolant sensor and the coolant level sensor and I

Resolved Question:

I have a 96 Grand Cherokee. I have replace the coolant sensor and the coolant level sensor and I still get the message that the coolant sensor is bad .
Submitted: 8 years ago.
Category: Jeep
Expert:  dually2 replied 8 years ago.
Wlcome to J.A. can you wiggle the coolant resivoir wiring and does it go out for a while?
Customer: replied 8 years ago.
I already try moving the wires at the level sensor and the coolant sensor .
Expert:  dually2 replied 8 years ago.
Those models have a problem with the wiring to the coolant level sensors,its a good chance the connector pins are spread and not contacting like they are suppose to. Working for a jeep dealer i have seen my share.
dually2 and other Jeep Specialists are ready to help you

Related Jeep Questions