How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Richard Your Own Question
Richard
Richard, Jaguar Technician
Category: Jaguar
Satisfied Customers: 15347
Experience:  12 years at a Ford/Lincoln Mercury and Jaguar dealer as technician and shop foreman.
10437779
Type Your Jaguar Question Here...
Richard is online now
A new question is answered every 9 seconds

Jaguar S-Type: A month ago I bought a 2004 S type Jaguar with

Customer Question

A month ago I bought a 2004 S type Jaguar with only 41545 miles.
VIN SAJEA01T54FN04530. I only use it for 19 days because when I was running it the car suddenly stop by itself and went on reverse. Then gave me a transmission fault message.
The scan gave me this codes: P1582, P0701, P0732, P0731. can you please tell me what they mean.
Submitted: 7 months ago.
Category: Jaguar
Expert:  Richard replied 7 months ago.
These are al gear ratio codes indicaing a mechanical failure. We first need to check the fluid level and condition as low fluid can be the cause. Since there is no dipstick this is not easily done. A dill/level check plug needs to be removed with the fluid warmed, engine running and vehicle on a level surface or lift. Once fluid flows out it is full. Another possibility is the Transmission Control Module which is inside the transmission. We first need to check the fluid. Let me know.

Related Jaguar Questions