How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask peterpete190 Your Own Question
peterpete190, Auto Technician
Category: Jaguar
Satisfied Customers: 25762
Experience:  Auto repair Technician with 17 years experience.Past ASE and other certifications.
Type Your Jaguar Question Here...
peterpete190 is online now
A new question is answered every 9 seconds

Jaguar XJ8 L: xj8 2001 no ignition monitor signal from ecm

Customer Question

xj8 2001 no ignition monitor signal from ecm pin EM83-10 and 11,yellow and green to coils bank 1 and 2.Should be 23 HZ @ idle.It has 4.6 v ,when testing other xj8 I get 23 HZ. increses with ROM. jc
Submitted: 1 year ago.
Category: Jaguar
Customer: replied 1 year ago.
(Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Phone Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Expert:  peterpete190 replied 1 year ago.
My name is ***** ***** I am a professional here at Just Answer. I noticed that your question was not getting a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here.
From what you have described here this may be an issue with the crank shaft position sensor sending incorrect signals or no signals at all.If this has not been checked this should be done and if found to be at fault it will need replaced.
Thanks Pete