How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Industrial Equipment
Satisfied Customers: 27469
Experience:  Technican turned service manager on multiple lines of equipment used in industry.
Type Your Industrial Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

My RAS 20 walkbehind forlift is displaying code c 28 and the

Customer Question

My Raymond RAS 20 walkbehind forlift is displaying code c 28 and the picture of a wrench and nothing including the horn will work
JA: What is the complete model and serial number of your machine?
Customer: It is RAS 20 model and someone is getting me the serial # now
JA: Anything else you want the industrial mechanic to know before I connect you?
Customer: yes let me get the serial # before you connect me
Submitted: 5 months ago.
Category: Industrial Equipment
Expert:  Curtis B. replied 5 months ago.

Hello! Let's see if we can can work together to get to the root of your question!

Expert:  Curtis B. replied 5 months ago.

313433-000 RESISTOR-PRE CHARGE, is a small relay looking affair , that pre-charges the controller. Code references voltage problem with controller. And this precharger resistor is what charges the controller. You may want to check the number, as it may not be same for the RAS model.

Expert:  Curtis B. replied 5 months ago.

I see question is still open, did you find problem? Please rate to close.

Related Industrial Equipment Questions