How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Industrial Equipment
Satisfied Customers: 26015
Experience:  Technican turned service manager on multiple lines of equipment used in industry.
30244710
Type Your Industrial Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Machine acts like it is in neutral will not raise or lower

Customer Question

Machine acts like it is in neutral will not raise or lower appears to be all the way down but the stabilizer bars on ea side underneath are not going up key sw in in the chassis position what am I not doing correctly or migh there be a problem
JA: What is the complete model and serial number of your machine?
Customer: Mx19 upright
JA: Anything else you want the industrial mechanic to know before I connect you?
Customer: I think that is all
Submitted: 1 month ago.
Category: Industrial Equipment
Expert:  Curtis B. replied 1 month ago.

Hello! Let's see if we can can work together to get to the root of your question!

Expert:  Curtis B. replied 1 month ago.

Look at the outriggers, if they do not go up, if they do not activate the switch, it will keep unit from working. No need to look anywhere else, until you get the outrigger switch working. Switches , one on each end, usually can be seen through the lower compartments. Your linkage on the outrigger may be jammed with board.

Expert:  Curtis B. replied 28 days ago.

I see question is still open, did you find problem?

Related Industrial Equipment Questions