How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kevin Your Own Question
Kevin
Kevin, Technician
Category: Industrial Equipment
Satisfied Customers: 732
Experience:  I am a John Deere Ag Tech with over 10 years of expirence.
32685367
Type Your Industrial Equipment Question Here...
Kevin is online now
A new question is answered every 9 seconds

I HAVE A STAMFORD ELECTIRICITY PRODUCING UNIT, WITH A DEERE

Customer Question

HI,
I HAVE A STAMFORD ELECTIRICITY PRODUCING UNIT, WITH A JOHN DEERE ENGINE.
SINCE THE JD ENGINE HAS BCOM OLD NEED TO REPLACE IT.
STAMFORD NO. A06G607877
JOHN DEERE MODEL IS 5030TF270A. WILL THIS ELECTRIC BELL HOUSING UNIT FIT TO THIS ENGINE 5030TF
Submitted: 8 months ago.
Category: Industrial Equipment
Expert:  Kevin replied 8 months ago.

Hello, my name is ***** ***** I can help you with your question.

The mating housing on the John Deere 3.0 liter engines are all the same. The bell housing on the engine can be changed or swapped from one engine to the other if needed. You will most likely have to swap flywheels however the engine mating surface should be the same.

Please let me know if I can be of any further assistance.

Thanks,

Kevin

Expert:  Kevin replied 8 months ago.

If have the serial number off both engines I can look up the build codes and verify that the replacement has the necessary codes.

Thanks,

Kevin