How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Industrial Equipment
Satisfied Customers: 577
Experience:  Technican turned service manager on multiple lines of equipment used in industry.
Type Your Industrial Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Onan/cummin 600dfgb 480 volts This unit was used as backup

Customer Question

onan/cummin 600dfgb 480 volts
This unit was used as backup at a water plant.It was installed with a transfer switch.I have this unit on a gravel crushing spread. This unit is now set up as power goes out transfer switch kicks in and generator up to 1800 rpm .
Having this on a gravel spread in the morning start gen up at igle for couple minutes for warm up and also after day work idle down for couple minutes for cool down.
I would need a low idle swicth or lever on feul pump ?
Submitted: 27 days ago.
Category: Industrial Equipment
Expert:  Matthew Ham replied 26 days ago.

Hello how are you. Are you still needing help with this question?

Related Industrial Equipment Questions