How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask spankyjr1 Your Own Question
spankyjr1, Journeyman
Category: Industrial Equipment
Satisfied Customers: 2498
Experience:  I worked on all types of equipment semis,forklifts,farm,ect.
Type Your Industrial Equipment Question Here...
spankyjr1 is online now
A new question is answered every 9 seconds

Have a 1994 JLG manlift model H crankcase breather tube to

Customer Question

have a 1994 JLG manlift model H
crankcase breather tube to carb inlet I disconnected because oil bypassing foiled plugs and made for hard starting. So now starts good but get lot smoke when running in gear but not much when not driving. The tube I just ran out bottom to the air. What can I do to fix somking. Overhall engine???
Submitted: 4 months ago.
Category: Industrial Equipment
Expert:  spankyjr1 replied 4 months ago.

Check you PCV valve ,if it is stuck (no rattle when shaken) then its not working and will cause your issue.

Other possible causes are worn cylinders,

Also make sure air filter is good and exhaust not plugged

Related Industrial Equipment Questions