How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Industrial Equipment
Satisfied Customers: 625
Experience:  Technican turned service manager on multiple lines of equipment used in industry.
30244710
Type Your Industrial Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Have a7fgu25 forklift that will not crank. No clinking or whatever.

Customer Question

Have a7fgu25 forklift that will not crank. No clinking or whatever. Bats are good
JA: Sometimes things that you think will be really complicated end up being easy to fix. The Industrial Equipment Mechanic I'm going to connect you with knows all the tricks and shortcuts. Tell me a bit more about what's going on so the Industrial Equipment Mechanic can help you best. Is there anything else important you think the Industrial Equipment Mechanic should know?
Customer: ?
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Industrial Equipment Mechanic about your situation and then connect you two.
Submitted: 9 months ago.
Category: Industrial Equipment
Expert:  Parish Westbrook replied 9 months ago.
are you getting power to the signal wire when turn the keyswitch to start
Expert:  Parish Westbrook replied 9 months ago.
to the starter
Expert:  Parish Westbrook replied 9 months ago.
how did you determine the batteries are good
Expert:  Parish Westbrook replied 9 months ago.
is there any update