How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Industrial Equipment
Satisfied Customers: 593
Experience:  Technican turned service manager on multiple lines of equipment used in industry.
30244710
Type Your Industrial Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Case 586E forklift. attempting to remove both small steering

Customer Question

Case 586E forklift. attempting to remove both small steering hydraulic cylinders. have removed each slotted nut at each cylinder end but unable to back out bolts holding each cylinder end in place. was told by dealer that I should be able to push bolts back out. am I missing a step somewhere or just need more force?
Submitted: 7 months ago.
Category: Industrial Equipment
Expert:  Dan replied 7 months ago.
Hi John, My name is***** is your lift serial number so I can look this up in the manuals for what cylinder you have

Related Industrial Equipment Questions