How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Industrial Equipment
Satisfied Customers: 578
Experience:  Technican turned service manager on multiple lines of equipment used in industry.
Type Your Industrial Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

We have a marklift j30ep aerial lift platform and just replaced

Customer Question

we have a marklift j30ep aerial lift platform and just replaced the hydraulic pump when the motor/pump coupler broke. we now only get 750 to 900 lb pressure even when deadheading pump on for a short burst. is this normal or should it be higher?
Submitted: 5 months ago.
Category: Industrial Equipment
Expert:  Bradley Martin replied 5 months ago.
Have you checked you pump suction line for contamination?

Related Industrial Equipment Questions