How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dan Your Own Question
Dan
Dan, Technician
Category: Industrial Equipment
Satisfied Customers: 4376
Experience:  17+ yrs. shop and field experience with all major brands of heavy equipment and trucks - 1995 WyoTech graduate.
65405794
Type Your Industrial Equipment Question Here...
Dan is online now
A new question is answered every 9 seconds

I have a 2014 biljax 55xa and I'm getting an error saying jib

Customer Question

I have a 2014 biljax 55xa and I'm getting an error saying jib open circuit 029. I tried changing sensors and nothing changed. What do I do now?
Submitted: 7 months ago.
Category: Industrial Equipment
Expert:  Dan replied 7 months ago.
Hi, my name is***** is the serial number of your lift?
Expert:  Dan replied 7 months ago.
029 OPEN CIRCUITJIB UPA load of less than 70mAwas detected when JibUp circuit was energizedOpen circuit wire fromJib Up coil... Inspect the harness and connector pins.This is a latched error.Power must be cycled toclear errorChecked only atpower upArticulating Boom Models
Expert:  Dan replied 7 months ago.
Click on this link to access the complete manual for troubleshooting.Troubleshooting
Expert:  Dan replied 7 months ago.
Copy and paste this link in your browser as the links will no post for some reason.http://www.biljax.com/clientuploads/manuals/Lifts/B33-01-0112%20-%2055XA%20HTA%2019%20PX%20-%20Operator's%20&%20Maintenance%20Manual%20-%20Rev%204.pdf

Related Industrial Equipment Questions