How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Industrial Equipment
Satisfied Customers: 576
Experience:  Technican turned service manager on multiple lines of equipment used in industry.
Type Your Industrial Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

I have a 1974 wiggins with a 4 cyl. ford industrial engine

Customer Question

I have a 1974 wiggins with a 4 cyl. ford industrial engine and I have replaced the coil,points and condenser, rotor distributor cap spark plugs and plug wires and cannot get fire to the spark plugs. I have set the gap on the points at .022 and the gap on the plugs
at .035 ANY SUGGESTIONS This engine was running before I did the tune up
Submitted: 6 months ago.
Category: Industrial Equipment
Expert:  Bradley Martin replied 6 months ago.
Are you getting fire out of the cap?

Related Industrial Equipment Questions