How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Industrial Equipment
Satisfied Customers: 590
Experience:  Technican turned service manager on multiple lines of equipment used in industry.
30244710
Type Your Industrial Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

C30L Forklift, I am getting the lift to go in limp mode, I

Customer Question

C30L Forklift
JA: Thanks. Can you give me any more details about your issue?
Customer: I am getting the lift to go in limp mode, I checked engine codes and get 12...697...374...12 I assume 12 are beginning and end
JA: OK got it. Last thing — Mechanics generally expect a deposit of about $18 to help with your type of question (you only pay if satisfied). Now I'm going to take you to a page to place a secure deposit with JustAnswer. Don't worry, this chat is saved. After that, we will finish helping you.
Submitted: 8 months ago.
Category: Industrial Equipment
Expert:  Bradley Martin replied 8 months ago.

What is the make of this lift? Looks like a clark model number am I correct

Customer: replied 8 months ago.
clark c30l
Expert:  Bradley Martin replied 8 months ago.

Ok let me see what I can find out for you

Expert:  Bradley Martin replied 8 months ago.

What is your serial number?

Customer: replied 8 months ago.
P232l-0532-9645-kf
Expert:  Bradley Martin replied 8 months ago.

Ok I am pulling the manual up now I will get back with you

Expert:  Bradley Martin replied 8 months ago.

Does you dash panel look like this

Expert:  Bradley Martin replied 8 months ago.

I cant seem to find 697 and 374 in my books are you sure that is what the codes are reading

Customer: replied 8 months ago.
No the codes are obtained with engine light flashes. You depress the accelerator 3 times in five seconds then the engine light flashes in sequence. Starts with 1 pause then 2 pause then the codes then ends with the 1-2. Then repeats the codes. Codes may be 69. 73. 74
Expert:  Bradley Martin replied 8 months ago.

The picture I sent is that your dash

Expert:  Bradley Martin replied 8 months ago.

Is this lift gas or electric or diesel?

Customer: replied 8 months ago.
No the dash does not have a lcd. There is no message center
Customer: replied 8 months ago.
The lift os lpg
Expert:  Bradley Martin replied 8 months ago.

What model engine do you have?

Expert:  Bradley Martin replied 8 months ago.

Look at this and see if you can get a 4 digit flash code

Expert:  Bradley Martin replied 8 months ago.

Any update today?

Customer: replied 8 months ago.
No. I am going to try to find a dealer. Thanks for the help
Expert:  Bradley Martin replied 8 months ago.

No problem let me know if I can help you with anything else

Related Industrial Equipment Questions