How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Industrial Equipment
Satisfied Customers: 590
Experience:  Technican turned service manager on multiple lines of equipment used in industry.
30244710
Type Your Industrial Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Have a linde h45d with a perkins diesel, this morning we

Customer Question

have a linde h45d with a perkins diesel, this morning we went to start it ,just turned over a couple of times and all of a sudden theres nothing there any more. could it be a fuse and if so where is the fuse box located ?
Submitted: 9 months ago.
Category: Industrial Equipment
Expert:  Bradley Martin replied 9 months ago.

The fuse panel location is behind the plastic cover behind the operator seat. I would check all fuses first if all fuses are good you more than likely have a starter problem. check and make sure your getting signal voltage from key switch to signal wire on stater. Also check battery cable on starter might be loose. Let me know if you need anymore info.

Expert:  Bradley Martin replied 9 months ago.

Have any luck with your issue?

Related Industrial Equipment Questions