How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Industrial Equipment
Satisfied Customers: 26519
Experience:  Technican turned service manager on multiple lines of equipment used in industry.
30244710
Type Your Industrial Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Yale mod. glc 050ygnuae084 lp gas, cranks, no start. new

Customer Question

yale mod. glc 050ygnuae084 lp gas, cranks, no start. new plugs,cap, rotor,wires changed regulator,fuel lock off press sending unit. changed fuel line tank coupler,fuel tank,new coil,and still no start. seems like low or no fuel to carb. also have good spark. any ideas.
Submitted: 1 year ago.
Category: Industrial Equipment
Expert:  Curtis B. replied 1 year ago.

Has the timing been checked? Pull # ***** spark plug , and the distributor cap and watch the rotor as # ***** cylinder blows compression, do ti a few times to be sure where rotor is pointing, then compare rotor to # ***** on the distributor cap. If rotor is off, the timing belt has likely slipped! The Mazda engine is a timing belt engine.

Expert:  Curtis B. replied 1 year ago.

If engine has fuel problem, try spraying a bit of starting fluid to see if it will fire. I think you will find timing is off.

Expert:  Curtis B. replied 1 year ago.

I see my responses are showing as customer!

Expert:  Curtis B. replied 1 year ago.

Let's try again!

Expert:  Curtis B. replied 1 year ago.

Did you find problem?

Expert:  Curtis B. replied 1 year ago.

Did you find problem? Please rate and accept to close.

Related Industrial Equipment Questions