How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dan Your Own Question
Dan
Dan, Technician
Category: Industrial Equipment
Satisfied Customers: 4376
Experience:  17+ yrs. shop and field experience with all major brands of heavy equipment and trucks - 1995 WyoTech graduate.
65405794
Type Your Industrial Equipment Question Here...
Dan is online now
A new question is answered every 9 seconds

I have a p150 with power wizard 1.0 which has failed. Have

Customer Question

Hi. I have a p150 with power wizard 1.0 which has failed. Have replaced board with another power wizard 1.0. Motor is now running at 1365 rpm not 1500rpm as required. How can I change this. Mike
Submitted: 11 months ago.
Category: Industrial Equipment
Expert:  Dan replied 11 months ago.

Hi Mike, My name is***** will try to help. Check for an Engine Interface Module. It is likely that this will have to be adjusted to set your overspeed engine cut out RPMS. Click on this link and go to PDF page 54 for more info. Let me know.

http://s7d2.scene7.com/is/content/Caterpillar/C10551757

Related Industrial Equipment Questions