How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Industrial Equipment
Satisfied Customers: 26519
Experience:  Technican turned service manager on multiple lines of equipment used in industry.
30244710
Type Your Industrial Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

We have a Snorkel 20 lift and it won't go down anymore,

Customer Question

hello there.
We have a Snorkel 20 lift and it won't go down anymore, except emergency bleed valve.(platform and base control)
Any idea?
Thank you!
And we are located in Napa, CA and would like to get it serviced. Any service recommendation?
Submitted: 1 year ago.
Category: Industrial Equipment
Expert:  Curtis B. replied 1 year ago.

At the lowering valve should be the electric solenoid for the lowing valve. Are you getting battery voltage(24) to the solenoid when you select lower from upper or lower control? If you are, the solenoid or the valve itself may be bad. Remove it and check for obvious damage. If no voltage to the lowering valve, check the wiring from valve to harness.

Expert:  Curtis B. replied 1 year ago.

Did you find the problem?

Related Industrial Equipment Questions