How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Curtis B. Your Own Question
Curtis B.
Curtis B., Technician
Category: Industrial Equipment
Satisfied Customers: 26035
Experience:  Technican turned service manager on multiple lines of equipment used in industry.
30244710
Type Your Industrial Equipment Question Here...
Curtis B. is online now
A new question is answered every 9 seconds

Need help in identifying part scissor lift. Model GS3268

Customer Question

need help in identifying part for genie scissor lift. Model GS3268 2006 model, serial # ***** Electrical schematic #Es7161.
Wide paddle toggle (up and down) will go up but not down. Has part #?82417C under switch on panel but 8G5010C0001-YI on circuit switch.
Could this switch be my problem.
on platform joystick panel
Submitted: 1 year ago.
Category: Industrial Equipment
Expert:  Curtis B. replied 1 year ago.

The scissor has a lowering valve on the base of the lift cylinder. This solenoid valve is what the toggle switch has to activate. Does the unit lower from the lower control? If it does, solenoid is ok, and the upper toggle or wiring from top to bottom may be suspect. If scissor will not lower from the bottom control, then the lowering solenoid valve may have broken wire, or the solenoid valve may be bad.

Expert:  Curtis B. replied 1 year ago.

Genie Industries has on line parts manual that part can be identified in.

Related Industrial Equipment Questions