How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Wayne Your Own Question
Wayne
Wayne, Journeyman
Category: Industrial Equipment
Satisfied Customers: 8456
Experience:  worked on lift trucks, and IR air compressors
6825259
Type Your Industrial Equipment Question Here...
Wayne is online now
A new question is answered every 9 seconds

I have a JLG 400S boom lift. I'm wanting to lubricate the

Customer Question

I have a JLG 400S boom lift. I'm wanting to lubricate the Swing Bearing and don't see the grease zerks for this purpose. Where are they and how do I access?
Submitted: 1 year ago.
Category: Industrial Equipment
Expert:  Wayne replied 1 year ago.

Hi I'm Wayne

I will help you with this

here is a pic of where to grease it

Hi if this helped you

Please rate my answer 3 or more stars

If you need more info, use request button

Not Poor/Bad service

Customer: replied 1 year ago.
I've looked at the service manual, for my serial number, has a similar drawing but not enough detail for me. Looking for a picture showing the zerk location.The serial number is:S/N:(###) ###-####it is a 2003 model.
Expert:  Wayne replied 1 year ago.

Hi

Thank you for that

There are no grease fittings in there

you need to put them in the holes

reason being they would break off when turned

Wayne