How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jeremy Railsback Your Own Question
Jeremy Railsback
Jeremy Railsback,
Category: Industrial Equipment
Satisfied Customers: 9019
Experience:  Field Service Tech at AirWorx
8380480
Type Your Industrial Equipment Question Here...
Jeremy Railsback is online now
A new question is answered every 9 seconds

We are using a JLG 2646E2 in a theatre production theatrical

Customer Question

We are using a JLG 2646E2 in a theatre production for a theatrical scene. Can the raise / descent alarm be disable easily for this use? If so, where is it located and how to disable?
Submitted: 1 year ago.
Category: Industrial Equipment
Expert:  Jeremy Railsback replied 1 year ago.
On the green relay control board inside the left side door look for one of the spots labeled 2B There should be 2 wires coming out of it.Pull those out of the terminal board to disable the motion alarm.