I am interested in purchasing a MULTIQUIP welder/generator model #DCI-270SS whisper welder ser#2170181. The generator or this machine works OK, but the welding side seems to have a problem. When in welding mode and while you are welding you have hold the electrode very close to the metal while you weld. If you donot hold the electrode at just the right length you break arc, if to close, you stick the electrode. I have welded with Mille,Linclon, and Hobart motor driven portables and non of these machines are as difficult to run as this. You can increase/decrease the Amp setting on the machine and it will adjust, but you still have to maintain that same precise arc length. The machine is rated at 275AMPS welding and has a KUBOTA 3 cylinder diesel engine. Is there any thing I can do to make this machine less arc length critical, and more user friendly?
Hi, I’m a moderator for this topic and I wonder whether you’re still waiting for an answer. If you are, please let me know and I will do my best to find a Professional to assist you right away. If not, feel free to let me know and I will cancel this question for you. Thank you!
I haven't recieved any response except this.
Yes I am still waiting for a response from an expert. Also I have been charged both $60 & I believe $24 for the same question. please respond.
Thank you for your patience, your business is very important to us, we are waiting on the Professional with the right expertise to come online. Feel free to let us know if you would like us to continue searching for an Professional or if you would like us to close your question. Thank you for your understanding!
There seems to be no one who know about Multiquip welder/generators. You might as well close the question and I will try to find other options to answer my question.