How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George H. Your Own Question
George H.
George H., Hyundai Technician
Category: Hyundai
Satisfied Customers: 2041
Experience:  Hyundai Gold certified, ASE Master tech 15+ years
Type Your Hyundai Question Here...
George H. is online now
A new question is answered every 9 seconds

Passenger side driver seat don't work in any direction.

Customer Question

passenger side driver seat don't work in any direction.
Submitted: 5 months ago.
Category: Hyundai
Expert:  peterpete190 replied 5 months ago.

Hi my name is ***** ***** I will be happy to assist with this today.In some cases I may need more info to assist better.I apologize for any delay.

Just to be sure I hear this correctly is this the passenger front seat that is not working properly or both driver and passenger front seats?

Let me know so we can continue,thanks Pete.

Customer: replied 5 months ago.

passenger side only. Thank Pete

Expert:  peterpete190 replied 5 months ago.

Was anything checked/tested at all for this issue here?

Let me know so we can continue,thanks Pete

Customer: replied 5 months ago.

only the fuses. I did unplug the forward motor and test for power and ground, it had power and ground but im not sure if I tested the right spots.

Expert:  peterpete190 replied 5 months ago.

O.k.,did it have power and ground when operating the seat switch only?

Customer: replied 5 months ago.

Not sure i'll have to check

Customer: replied 5 months ago.

which connectors and wires should I test? thanks.

Expert:  peterpete190 replied 5 months ago.

O.k.,on the forward/back motor it looks like you should have two wires.One should have a ground signal and the other power (12 volts DC) when operating the switch forward.Then they should switch signals when operating the switch backwards.Meaning the one that had positive voltage would then be ground and the ground would then be power.

Test at the forward/back motor connection itself.

Let me know,thanks Pete

Expert:  peterpete190 replied 4 months ago.

Hello I am just checking in with you to see if there is anything else I can help with here?

Let me know,thanks Pete.