How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George H. Your Own Question
George H.
George H., Hyundai Technician
Category: Hyundai
Satisfied Customers: 2037
Experience:  Hyundai Gold certified, ASE Master tech 15+ years
13574682
Type Your Hyundai Question Here...
George H. is online now
A new question is answered every 9 seconds

Protection mode enabled

Customer Question

protection mode enabled
Submitted: 5 months ago.
Category: Hyundai
Expert:  Greg replied 5 months ago.

Hi Bill .

Can you give me some more /better information on your problem .

Protection mode or limp mode ,will not start or stuck in 3rd gear.

Greg

Customer: replied 5 months ago.
change transaxle road test appeared-no code- trans shift find
Expert:  Greg replied 5 months ago.

Sorry bili need more info no way i can help with this limited information

Expert:  Greg replied 5 months ago.

Before i call you Bill just give me a bit more heads UP on your problem .

Greg

Customer: replied 5 months ago.
car came in slipping & making noise. change trans with one that had 19000 miles. shifts great no slipping no codes found.now protection enabled comes up on radio screen as soon as you drive about 1/2 mile
Customer: replied 5 months ago.
watch scanner 2nd clutch reads 260- 270 error on select lever switch TGS