How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George H. Your Own Question
George H.
George H., Hyundai Technician
Category: Hyundai
Satisfied Customers: 2033
Experience:  Hyundai Gold certified, ASE Master tech 15+ years
13574682
Type Your Hyundai Question Here...
George H. is online now
A new question is answered every 9 seconds

I have problem with my hyundai tucson 2006 engine light one,

Customer Question

hi
JA: Hello. What is your issue regarding?
Customer: i have problem with my hyundai tucson 2006 engine light one
JA: Do you have the trouble code? Do you have a code reader or scan tool?
Customer: on check Bank 2 sensor 1
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: bank 1 sensor 2
JA: Anything else you think the mechanic should know?
Customer: the brake light too on
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Hyundai Mechanic about your situation and then connect you two.
Submitted: 5 months ago.
Category: Hyundai
Customer: replied 5 months ago.
my AC&heater control switch no work the cool come to the top on the front glass
Customer: replied 5 months ago.
Customer: replied 5 months ago.
i pay ready now $5 another $5 dollars again
Expert:  Kavey replied 5 months ago.

Hello. My name is ***** ***** I will be helping you today.

What are the code numbers of your codes?

Customer: replied 5 months ago.
hi u ask me the code
the error codes read is
Code P0052 indicates that the Bank 2 sensor 1 HO2S heater control circuit signal had high voltage for predetermined period of time.
P0052/ P0150/P0137/P0036/
thank reply to me please
Expert:  Kavey replied 5 months ago.

Im not sure it will cure all of your codes but there is an update for the ECM for the oxygen sensor setting codes that you need to have done first. Then clear the codes and see what comes back then we can look into those.

Related Hyundai Questions