How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask eauto Your Own Question
eauto
eauto, The Car Guy
Category: Hyundai
Satisfied Customers: 15700
Experience:  ase certified, imac, macs, bridhestone certified
6149662
Type Your Hyundai Question Here...
eauto is online now
A new question is answered every 9 seconds

The window actuator on my 2012 Elantra Touring broke last

Customer Question

The window actuator on my 2012 Elantra Touring broke last week. I ordered the part and am now trying to install it. How do I get the window into the track and lined up with the actuators correctly?
Submitted: 1 year ago.
Category: Hyundai
Expert:  eauto replied 1 year ago.
  1. Remove the front door trim.
  2. Remove the glass mounting hole plug (B).
  3. NOTE:
  • Using the door switch to align the mounting hole with the hole on the door glass.
  • If it is impossible, align the hole with hands after removing the motor.
  • Take care not to drop to glass and scratch the glass surface.
  1. Carefully move the glass (A) until you can see the bolts, then loosen them. Separate the glass from the glass run and carefully pull the glass out through the window slot.

  1. Installation is the reverse of removal.

NOTE:

  • Roll the glass up down to see if it move freely without binding.
  • Adjust the position of the glass as necessary