How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dave Nova Your Own Question
Dave Nova
Dave Nova, ASE Certified Tech
Category: Hyundai
Satisfied Customers: 19451
Experience:  ASE Master Certification. GM World Class Certification
11042942
Type Your Hyundai Question Here...
Dave Nova is online now
A new question is answered every 9 seconds

I was replacing a/c light bulb and touch the conectors with

Customer Question

I was replacing a/c light bulb and touch the conectors with the screw drive. When I did this the dash lights when out and the headlights when out too. What should I do. I did check the 15 amp fuse and it seemed fine. its a 2005 Elantra
Submitted: 1 year ago.
Category: Hyundai
Expert:  Dave Nova replied 1 year ago.

You most likely blew the 10 Amp fuse in the dash fuse panel. This is fuse #20. Replace this fuse and you should be good to go.

Dave

Customer: replied 1 year ago.
Thank you so much! I will try this when I get home. I appreciate your advise! -Todd
Expert:  Dave Nova replied 1 year ago.

You are welcome. Let me know if you need additional assistance.

Dave