How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Eric Your Own Question
Eric
Eric, Automotive Repair Shop Manager
Category: Hyundai
Satisfied Customers: 31350
Experience:  20+ yrs. experience as repair shop manager and technician.
3195632
Type Your Hyundai Question Here...
Eric is online now
A new question is answered every 9 seconds

I have a 2010 Genisis 2.0T with a CEL. I have replaced the

Customer Question

i have a 2010 Genisis 2.0T with a CEL for P2261. I have replaced the Bypass solenoid and still the light is returning. System is by all appearances working well and bypass valve works immediately when throttle is released. Any ideas??
Submitted: 1 year ago.
Category: Hyundai
Expert:  Eric replied 1 year ago.

HI,

I am sorry that you have not been helped yet. I just came online and saw your question.

You need to check for poor connection between the ECM and the solenoid, poor terminal or wire connections, broken or loose pins. If ok, although rare, check valve timing. Valve timing off can set this code. If ok, then likely the ECM