How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask K. Wiggins Your Own Question
K. Wiggins
K. Wiggins, ASE Certified Technician
Category: Hyundai
Satisfied Customers: 2838
Experience:  ASE Certified Technician, Associates Degree in Automotive Technology, 15+ years in the trade
68360881
Type Your Hyundai Question Here...
K. Wiggins is online now
A new question is answered every 9 seconds

I need to replace my RH CV shaft ( preassembled unit) on my

Customer Question

I need to replace my RH CV shaft ( preassembled unit) on my 09 Santa Fe. Will I need to remove the intermediate shaft along with it as my Haynes manual seems to indicate to do or do you think that the CV and intermediate shafts can be separated without
pulling dropping the support bearing and pulling the intermediate out of the transaxle?
Submitted: 1 year ago.
Category: Hyundai
Expert:  K. Wiggins replied 1 year ago.

Hello, you will need to pull the support bearing and stub shaft with the CV shaft.

Related Hyundai Questions