2001 Hyundai Accent 1.5L. I recently bought this car and the previous owner installed an aftermarket sunpro tachometer since the car does not have a stock one. However the tach only reads about 2,000 rpm at near redline. the green wire out of the tach which is supposed to connect to the coil tach output has been spliced into the wire connector for cylinder #3 coil pack which I dont think is correct. There are two coil packs for cylinder # XXXXX & 3/4 each with 2 small wires in a plug connected to each. Where should I wire the tach to? Thanks
Country: United StatesMake: HyundaiModel: Accent LYear: 2001Engine: 1.5L sohc
Hi, I’m a moderator for this topic and I wonder whether you’re still waiting for an answer. If you are, please let me know and I will do my best to find a Professional to assist you right away. If not, feel free to let me know and I will cancel this question for you. Thank you!
Still waiting for an answer. Thanks
Still waiting for an answer....
I requested a refund. I figured out the answer to my question while waiting for a response from an expert. Thank You anyway