How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask spiresuzuki Your Own Question
spiresuzuki
spiresuzuki, Technician
Category: Hyundai
Satisfied Customers: 358
Experience:  Worked in a 15 years specialising in Hyundai &Suzuki
11541481
Type Your Hyundai Question Here...
spiresuzuki is online now
A new question is answered every 9 seconds

Hyundai getz drivers door centrl locking not wocking

Customer Question

hyundai getz drivers door centrl locking not wocking
Submitted: 5 years ago.
Category: Hyundai
Expert:  spiresuzuki replied 5 years ago.
Hi
Welcome to JA.com
Is the central door locking working at all?
Do you mean locking?
Customer: replied 5 years ago.
3 doors work .drivers not. on the remote
Expert:  spiresuzuki replied 5 years ago.
Hi
Thanks for the reply.
What have you changed you say the lock? do you mean lock barrel or door actuator?
Is your problem just with remote locking?
Customer: replied 5 years ago.
yes remote locking on drivers door changed actutor
Expert:  spiresuzuki replied 5 years ago.
Hi

I will look over a wiring diagram and get back to you tomorrow
Customer: replied 5 years ago.
thank u
Expert:  spiresuzuki replied 5 years ago.
Hi
i have attached a copy of the wiring diagram for the front doors, the area i have marked a area that you should check, as i have noted on the digram you need to check for 12volts at red/orange wire at the door actuator.
If no reading then go to the connection in the A post between the body and door.
The diagram is for a 2005 but your wiring is the same
graphicgraphic
Customer: replied 5 years ago.
12 volts at red/orange wire on remote 12 volte at green wire ? adam
Expert:  spiresuzuki replied 5 years ago.
Hi Adam

Have you got a good earth on the black wire?
The gray wire is a control feed to the control unit when you lock/unlock the door with the key.
If all the wires check out ok then you should check the 12 volt wires with a test lamp, this will show if the current is running to the door actuator.