How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Alex Your Own Question
Alex
Alex, ASE Certified Technician
Category: Hyundai
Satisfied Customers: 1161
Experience:  ASE Certified Master Technician, L1 Advanced Level Specialist
15182921
Type Your Hyundai Question Here...
Alex is online now
A new question is answered every 9 seconds

2006 Elantra, location of camshaft position sensor

Customer Question

how to you locate and replace the camshaft position sensor on a 2006 elantra
Submitted: 5 years ago.
Category: Hyundai
Expert:  Alex replied 5 years ago.
Hello. My name is XXXXX XXXXX I'll be assisting you with your question.

Here is the information you requested:

CAMSHAFT POSITION SENSOR

  1. Remove the engine cover(B).
  2. Disconnect the camshaft position sensor connector.
graphic

Remove the camshaft position sensor(C)



graphic



graphic
Alex and other Hyundai Specialists are ready to help you
Customer: replied 5 years ago.
Is the part hardwired or does it plug in?
Expert:  Alex replied 5 years ago.
The wiring connector from the engine harness should plug directly into the sensor. Push the button on the connector to release the tab and pull the connector off of the sensor. The sensor should look like this:

graphic