How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 6022
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

Got a filter reset message, did so. raised temp, fan blew

Customer Question

got a filter reset message, did so. raised temp, fan blew fora bit then stopped. went to filter at furnace and it was a bit dirty so took it out. came back in and reset temperature to restart. No fan, motor just keeps running. I've got no control at remote.
JA: Did you check the furnace's filters?
Customer: yeah...it could be cleaner but just replaced it a couple of months ago. I can take it out
JA: Do you plan on doing the work yourself?
Customer: not really...if I could find a restart button on the furnace, I might try that.
JA: Anything else we should know to help you best?
Customer: seems like something still operating at furnace...but not heating.
Submitted: 4 months ago.
Category: HVAC
Expert:  Rick replied 4 months ago.

Welcome to Just Answer, my name is ***** ***** I will do my best to help you with your issue. First I’ll need some more info so I have a more complete picture of you situation.

What is the brand and model number of your unit?

Customer: replied 4 months ago.
Bryant 352AAV
Customer: replied 4 months ago.
No phone yet
Expert:  Rick replied 4 months ago.

What are you getting for a flash sequence on the control board?

Customer: replied 4 months ago.
Which? At furnace itself?
Customer: replied 4 months ago.
Or in the house at wall thermostat
Expert:  Rick replied 4 months ago.

The furance board.

Customer: replied 4 months ago.
I'll have to open it doing so
Customer: replied 4 months ago.
Open now
Expert:  Rick replied 4 months ago.

You should be able to see the oard LED trough a viewing port in the blower compartment panel. You don't want to remove the panel since it will kill the power and change the flash sequence

Customer: replied 4 months ago.
Too late removed but no display inside
Expert:  Rick replied 4 months ago.

I'm going to open this up to my colleagues so one of them can help. Please don't respond (even to acknowledge this post)until you get a response from us. If you respond first it will only delay your answer.

Customer: replied 4 months ago.
Fan running
Customer: replied 4 months ago.
Fan running won't stop