How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 6022
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

I have a Carrier 58GSC furnace. At the blower cycles on and

Customer Question

I have a Carrier 58GSC furnace. At the blower cycles on and off a few times at the end of heating cycle. I already replaced the limit switch but it didn't help. The filter is clean.
JA: Did you double-check the thermostat's settings? And what about the filters?
Customer: thermostat is fine. We never changed the setting. Filter is clean.
JA: Do you plan on doing the work yourself?
Customer: yes
JA: Anything else we should know to help you best?
Customer: no
Submitted: 3 months ago.
Category: HVAC
Expert:  gotoman for ac replied 3 months ago.

Russ here. You have replaced limit that will cause this problem. The only thing left is the board. It is a time delay for fan. To double check and to make sure it is board. When heat is on disconnect w from from the furnace to shut down heat. If the fan does the same thing it is board. Russ