How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 6022
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

My blower motor is blowing low heat.and the furnace is new

Customer Question

My blower motor is blowing low heat.and the furnace is new out the box.it say it is set on low from the factory. How do I fix the problem. Thank you
JA: Did you check the furnace's filters?
Customer: New
JA: Do you plan on doing the work yourself?
Customer: Yes
JA: Anything else we should know to help you best?
Customer: No
Submitted: 4 months ago.
Category: HVAC
Expert:  gotoman for ac replied 4 months ago.

Russ here. Give me model number of furnace and we can correct problem. Russ

Customer: replied 4 months ago.
EL296UH045XE36B-02
Expert:  gotoman for ac replied 4 months ago.

The dip switches on the board. When you connect to W1 with dip switch set to off it takes gas valve 7 minutes to go to high stage with switch 2 in opposition it takes 12 minutes to go to high. Russ

Related HVAC Questions