How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 6022
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

I have a model fk4cnf003 when the heat cycle turns on, the

Customer Question

i have a bryant model fk4cnf003 when the heat cycle turns on, the top breaker in the 2 breaker config clicks off and no heat, i reset the breaker and the same thing repeats
JA: Did you double-check the thermostat's settings? And what about the filters?
Customer: therm set is ckd and ok, new filter is in
JA: Do you plan on doing the work yourself?
Customer: i would like to try
JA: Anything else we should know to help you best?
Customer: not at this time
Submitted: 4 months ago.
Category: HVAC
Expert:  BillyHvac replied 4 months ago.

Is the breaker turning off the blower or just an electric heat strip?

Customer: replied 4 months ago.
apparantly both
Expert:  BillyHvac replied 4 months ago.

you will need to unhook a feature at a time to see what is shorting the breaker..in this case it is likely the motor, electrical strip or burned wire..

Related HVAC Questions