How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 6022
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

My York furnace with Rodgers 50A50-241 attempts to ignite

Customer Question

My York furnace with White Rodgers 50A50-241 attempts to ignite but fails after a couple of seconds. After about about 5 attempts the blower starts and blows cold air and the red blinking light flashes 8 times. Any ideas?
Thank you
Submitted: 2 months ago.
Category: HVAC
Expert:  BillyHvac replied 2 months ago.

hello,

can you tell me if the flame is actually hitting the sensor?

Have you cleaned the flame rod with steel wool yet?

Related HVAC Questions