How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 6022
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

I have carrier 8000 ts code 43 did what you said with hose

Customer Question

I have carrier 8000 ts code 43 did what you said with hose it's clean and dry and still no luck
Submitted: 4 months ago.
Category: HVAC
Expert:  airheatman replied 4 months ago.

Check and see if board is sending 120 volts to igniter 15 seconds after vent motor starts.If not are you getting a code at that point?