How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask airheatman Your Own Question
airheatman
airheatman, HVAC Technician
Category: HVAC
Satisfied Customers: 7713
Experience:  Furnace, A/C and heat pump specialist.
16514686
Type Your HVAC Question Here...
airheatman is online now
A new question is answered every 9 seconds

I HAVE A BRAEBURN 2000 I WANT TO CANCEL THE PROGRAMMING.

Customer Question

I HAVE A BRAEBURN 2000 I WANT TO CANCEL THE PROGRAMMING. WHEN I PRESS THE HOLD BUTTON IT COMES ON FOR 2 MINUETS AND STOPS
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: FOR A MONTH
JA: Do you plan on doing the work yourself?
Customer: YES I WOULD LIKE TO...DO YOU HAVE SOMEONE IN MY AREA TO COME OUT
JA: Anything else we should know to help you best?
Customer: I AM FREEZING
Submitted: 5 days ago.
Category: HVAC
Expert:  airheatman replied 5 days ago.

If you want to cancel programmed settings locate the RESET button thermostat and push it.That should cancel any programs.

This site is a question and answer only site.We do not offer I home service.If you need help locating a local contractor, tell me your zip code and brand of heating unit and I will try to help you locate someone.

Expert:  airheatman replied 5 days ago.

Reset location

Expert:  airheatman replied 5 days ago.

You can use a straighten paper clip to press the reset though the little hole

Customer: replied 5 days ago.
It comes on for 1 minuet and stops. My zip code is 93065
please call
Expert:  airheatman replied 5 days ago.

Did you try using the paper clip and press the reset button and then try it?

Expert:  airheatman replied 5 days ago.

Try calling All Valley and let me know if they can come out.

http://www.allvalleyair.com/

Customer: replied 5 days ago.
Now day is flashing and heat
Expert:  airheatman replied 5 days ago.

OK let me know if heat will come on and stay on now

Customer: replied 5 days ago.
Do I push hold after I set the temperature?
Expert:  airheatman replied 5 days ago.

Yes that should hold permanently until you press again

Customer: replied 5 days ago.
This is not working. What about batteries would this cause run and turn off? How much am I being charged?
Expert:  airheatman replied 5 days ago.

Low batteries could cause this.Lets change them and see.If not and the reset does not work you will need to replace thermostat

Customer: replied 5 days ago.
i was charged for a phone call that i did not get!
Expert:  airheatman replied 5 days ago.

I did not accept the phone call offer.Most likely another expert did.I will advise administrators to refund phone call. Did this solve your problem?

Customer: replied 5 days ago.
Please do. I would appreciate it.
I am a widow in fixed income.
Expert:  airheatman replied 5 days ago.

No problem I have forwarded the request.

If you have further questions, please let me know.

Thanks for letting me work with you.If my answer has been polite, professional,and thorough, please click one of the ratings before you go. If you still need help let me know!.Expert is not paid for assisting you until you rate answer.Feel free to follow up for 30 days at no additional cost. Bonus always appreciated if you feel justified.

To rate answer, please select one of the stars on the page.