How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 5648
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

I am trying to hook up a non programable thermostate to a

Customer Question

i am trying to hook up a non programable thermostate to a 220 volt baseboard heater. The thermostat has 2 red wires, and 2 black wires. The end of the baseboard heater has a red and black wire joined together with the twisty cap and a ground. Does one red and one black wire from the thermostat go to the circuit box, and the other red and black to the heater itself, also a ground wire to the circuit box?
JA: Just to clarify, do you think this is a larger HVAC problem, or something specific to the thermostat?
Customer: its just a 6 foot long baseboard heater in the sunroom
JA: Do you plan on doing the work yourself?
Customer: already have the holes drilled, and yes, i'll do the work
JA: Anything else we should know to help you best?
Customer: just need to know about the two sets of red and black wires in the thermostat and where they go
Submitted: 8 days ago.
Category: HVAC
Expert:  airheatman replied 8 days ago.

Do you have the model on the thermostat ?

Expert:  airheatman replied 8 days ago.

Also model on heater