How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gaztech Your Own Question
Gaztech
Gaztech, HVAC Technician
Category: HVAC
Satisfied Customers: 437
Experience:  Owner at Gaztech
92290868
Type Your HVAC Question Here...
Gaztech is online now
A new question is answered every 9 seconds

I have a evo Gree split unit system. When I tried to start

Customer Question

I have a evo Gree split unit system. When I tried to start the heating system using the remote, a code of E6 appeared on the remote receiver sensor display. What does this mean?
JA: Did you double-check the thermostat's settings? And what about the filters?
Customer: I don't know if I double-clecked the thermostat's settings. The filters are clean!
JA: Do you plan on doing the work yourself?
Customer: If it's a simple solution that requires following directions with no special tools, I think I can do it.
JA: Anything else we should know to help you best?
Customer: The remote has new batteries.
Submitted: 5 months ago.
Category: HVAC
Expert:  Gaztech replied 5 months ago.

Welcome to Just Answer, my name is Luke

NOTE: I can only get credited for assisting you if you click the 5 star rating at the top of the page when we are done

E6 error code indicates that there is a communication error between indoor and outdoor unit

This is not a quick fix for the homeowner and will require technical knowledge of the Gree systems to diagnose the exact problem.

It usually means replacing either one of 6 sensors or a control board.