How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 5648
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

I just purchased a brand new Payne 92% furnace and when it

Customer Question

I just purchased a brand new Payne 92% furnace and when it runs, it's only blowing cold air
JA: Did you double-check the thermostat's settings? And what about the filters?
Customer: New filter and new thermostat also
JA: Do you plan on doing the work yourself?
Customer: Yes
JA: Anything else we should know to help you best?
Customer: Status code light is steady and not blinking
Submitted: 17 days ago.
Category: HVAC
Expert:  airheatman replied 17 days ago.

Can you give me complete model from inside furnace in burner compartment so I can provide guidance with this specific unit.Model will be on a label just above burners on right or left inside panel

http://i.imgur.com/U8b0GXT.jpg

Then look in blower compartment and see if we have a control board with a blinking light.If so tell me the pattern of that flash.That will indicate what is wrong and tell us where to start troubleshooting.