How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gaztech Your Own Question
Gaztech
Gaztech, HVAC Technician
Category: HVAC
Satisfied Customers: 361
Experience:  Owner at Gaztech
92290868
Type Your HVAC Question Here...
Gaztech is online now
A new question is answered every 9 seconds

I keep seeing error code 23 on a hvac. The 3A fuse was out

Customer Question

I keep seeing error code 23 on a Bryant hvac. The 3A fuse was burnt out and I thought that was the issue. I changed out the fuse and the system worked. It them stopped again. I cleared the rubber tube to the pressure switch, but just wanted to get your thoughts on what I am missing. The weird part is if I remove the fuse and reinstall the system works for one cycle. If it turn off it wont reengage. Help?!!!
JA: Are you an HVAC professional?
Customer: Nope
JA: Do you plan on doing the work yourself?
Customer: If possible...
JA: Anything else we should know to help you best?
Customer: Nope
Submitted: 20 days ago.
Category: HVAC
Expert:  Gaztech replied 20 days ago.

Welcome to Just Answer, my name is Luke

NOTE: I can only get credited for assisting you if you click the 5 star rating when we are done

Where the tube attached to the housing of the blower is Pull the tube off and check the orifice hole where it connects to the blower housing. Poke a paperclip or small rod through there to make sure it is clear and try it again.

Make sure the outside vents are clear.

Expert:  Gaztech replied 20 days ago.

OK