How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask HVAC Guru Your Own Question
HVAC Guru
HVAC Guru, HVAC TECH
Category: HVAC
Satisfied Customers: 13954
Experience:  15yrs in the HVAC industry with certificates and degrees.
21107370
Type Your HVAC Question Here...
HVAC Guru is online now
A new question is answered every 9 seconds

I had a pipe burst in my boiler room now my boiler won't

Customer Question

Hi I had a pipe burst in my boiler room now my boiler won't turn on
JA: How long has this been going on? And how severe is the problem?
Customer: I have a Beckett 7505 with a flashing red light
JA: Do you plan on doing the work yourself?
Customer: Yes how can I just reset the system
JA: Anything else we should know to help you best?
Customer: Nothing I can think of
Submitted: 13 days ago.
Category: HVAC
Customer: replied 13 days ago.
Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from you: Live Phone Call. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Expert:  HVAC Guru replied 13 days ago.

Hello, one minute while I get some information together.

Expert:  HVAC Guru replied 13 days ago.

Hello and thanks for using this service! If you are a JA Member I would like to personally thank you and welcome you back! I am Appliance Guru an extremely experienced tech on the site and I try to get to as many customers as I can. NOTE it takes time for me to type research and add links so please wait for me to respond back I can only do this so fast. Secondly, I do not know your skill level so please try and let me know if I am going beyond your knowledge or comfort zone thanks! I strive for a 5 star rating from everyone especially our JA members.

Answer:

Can you press and hold the red button in for 30-60 secs and then it should reset.

All I ask is please use the Star Rating Link at the top of your page before leaving, that is the only way I am credited through the site, tips are appreciated.

Customer: replied 13 days ago.
Where is the button located I have an older model and can't locate the reset
Expert:  HVAC Guru replied 13 days ago.

It should be right on the control where the wiring connects

Customer: replied 13 days ago.
No sir I don't see it
Customer: replied 13 days ago.
Ok it didn't work
Customer: replied 13 days ago.
I held down the button for 15 seconds
Expert:  HVAC Guru replied 13 days ago.

You have to hold it for 30-60 secs

Customer: replied 13 days ago.
I held it down for 60 seconds it didn't work
Expert:  HVAC Guru replied 13 days ago.

OK is anything flashing on the control?

Customer: replied 13 days ago.
Sounds like it wants to start
Customer: replied 13 days ago.
The red light restart button is flashing
Expert:  HVAC Guru replied 13 days ago.

OK does anything happen?

Customer: replied 13 days ago.
No
Expert:  HVAC Guru replied 13 days ago.

OK you likely have a bad cad cell on the unit that will cause that issue and then it will not reset to start

Customer: replied 13 days ago.
What's that and how to test it
Expert:  HVAC Guru replied 13 days ago.

CLICK HERE

All I ask is please use the Star Rating Link at the top of your page before leaving, that is the only way I am credited through the site, tips are appreciated.

Related HVAC Questions