How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 5648
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

How do you repair ignition lock out, this year on seson

Customer Question

how do you repair ignition lock out
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: this year on seson startup
JA: Do you plan on doing the work yourself?
Customer: yes
JA: Anything else we should know to help you best?
Customer: on thats it
Submitted: 3 months ago.
Category: HVAC
Expert:  Rick replied 3 months ago.

Welcome to Just Answer, my name is ***** ***** I will do my best to help you with your

issue. First I’ll need some more info so I have a more complete picture of you situation.

What is the brand and model number of your furnace?

Customer: replied 3 months ago.
coleman evcon modle #BGU07512A
Expert:  airheatman replied 3 months ago.

Try turning power off to clear code,Then back on.Then call far heat and see how far in sequence below it goes.

The normal sequence of operation:

Inducer vent motor comes on

Pressure switch closes

Igniter lights

Burners ignite

Main circulating blower comes on

If furnaces fails anywhere in the sequence we should get an error code by blinking lights on the control board. Turn power off and back on, then call for heat.tell me how far in that sequence it goes and what error code is on first failure We will go from here.

Customer: replied 3 months ago.
Clean out fan comes on but will not light
Expert:  airheatman replied 3 months ago.

Model on unit?