How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Phil Your Own Question
Phil
Phil, Mechanical Engineer
Category: HVAC
Satisfied Customers: 5648
Experience:  Retired HVAC/ Electrical & Boiler contractor. Industrial
23932409
Type Your HVAC Question Here...
Phil is online now
A new question is answered every 9 seconds

I have a Panasonic CU-E24FKR air con. When I try to start it

Customer Question

Hi, my name is Shane.
JA: I'll do all I can to help. How long have you been dealing with this?
Customer: I have a Panasonic CU-E24FKR air con. When I try to start it the timer light is flashing, I cleaned the filters, reset at the remote and restarted the air con. It ran for about 3-4 minutes then cut out again, timer light flashing. Could you tell me what the issue could be please?
JA: Did you double-check the thermostat's settings? And what about the filters?
Customer: Where is the thermostat. I have cleaned the filters.
JA: Do you plan on doing the work yourself?
Customer: Not sure, I am an electrician.
JA: Anything else we should know to help you best?
Customer: Not that I can think of, the air does not seem to be very cold, I had it set on 20 degrees.
Submitted: 1 month ago.
Category: HVAC
Expert:  Webb-Guy replied 1 month ago.

Hello and welcome to just answer my name is ***** ***** I will be the one who will try to assist you. Have you tried cancelling the timer program?

https://www.manualslib.com/manual/116986/Panasonic-Cs-E24fkr.html?page=8#manual

Page 8 of the manual.

Customer: replied 1 month ago.
Have tried that, it doesn't make fix the issue.
Expert:  Webb-Guy replied 1 month ago.

sounds like it may be a problem with the circuit board. Has any numbers popped up on the unit or have you tried counting the amount of times the light blinks?

Expert:  Webb-Guy replied 1 month ago.

you can press the check button for 5 seconds with a pen and then scroll down until it beeps to see if a number pops up.

Expert:  Webb-Guy replied 29 days ago.

I wanted to check in with you to see how everything was going? I wanted to see if you needed any further assistance.